Sign In | Join Free | My burrillandco.com
burrillandco.com

Hebei Lufeng Piping Equipment Co., Ltd.

Carbon /Alloy steel pipes, ERW steel pipes, API 5L LSAW&SSAW, ASME B16.9/MSS SP-75 BW pipe fittings, ASME B16.5/16.47 steel flanges, ASME B16.11/MSS SP-97 forged fittings, Knife gate valves, Butterfly

Verified Supplier

10 Years

Home > Steel Pipes & Tubes >

SA210-A1 seamless, length 5.8 meters each pipe, outer diameter 63.43 mm, thickness 6.5 mm.

Hebei Lufeng Piping Equipment Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
  • Product Details
  • Company Profile

SA210-A1 seamless, length 5.8 meters each pipe, outer diameter 63.43 mm, thickness 6.5 mm.

ASME SA-210 SPECIFICATION FOR SEAMLESS MEDIUM-CARBON STEEL BOILER AND SUPERHEATER TUBES


Chemical Composition (max. %)

ElementGrade A-1Grade C
C0.270.35
Mn0.930.29-1.06
P0.0350.035
S0.0350.035
Si≥0.100.10

For each reduction of 0.01% below the specified carbon maximum, an increase of 0.06% manganese above the specified maximum will be permitted up to a maximum of 1.35%.


Tensile Requirements

ElementGrade A-1Grade C
Tensile strength, min, ksi [MPa]60 [415]70 [485]
Yield strength, min, ksi [MPa]37 [255]40 [275]
Elongation in 2 in. or 50 mm, min, %3030

For longitudinal strip tests, a deduction shall be made for each 1/32 in. [0.8mm] decrease in wall thickness under 5⁄16 in. [8 mm] from the basic minimum

elongation of the following percentage points

1.50 A1.50 A
When standard round 2 in. or 50 mm gage length or smaller proportionally sized specimen with the gage length equal to 4D (four times the diameter) is used2220

A See Table below for the computed minimum values.


Wall Thickness, in. [mm]Elongation in 2 in. or 50 mm, min, %
5/16 (0.312) [8]30
9/32 (0.281) [7.2]28
1/4 (0.250) [6.4]27
7/32 (0.219) [5.6]26
3/16 (0.188) [4.8]24
5/32 (0.156) [4]22
1/8 (0.125) [3.2]21
3/32 (0.094) [2.4]20
1/16 (0.062) [1.6]18
0.062 to 0.035 [1.6 to 0.9], excl17
0.035 to 0.022 [0.9 to 0.6], excl16
0.022 to 0.015 [0.6 to 0.4], incl16

Hardness Requirements

The tubes shall have a hardness not exceeding the following: 79 HRB or 143 HB for Grade A-1, 89 HRB or 179 HB for Grade C.


Mechanical Tests Required

Tension Test

Flattening Test

Flaring Test

Hardness Test

Hydrostatic or Nondestructive Electric Test

Quality SA210-A1 seamless, length 5.8 meters each pipe, outer diameter 63.43 mm, thickness 6.5 mm. for sale
Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Hebei Lufeng Piping Equipment Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)